5774浏览
查看: 5774|回复: 11

[项目] LSM303电子罗盘怎么调试?

[复制链接]
LSM303电子罗盘怎么调试?
其中罗盘读数、加速度读数都不准确,应该怎么调试?
有具体的函数、算法吗?

gada888  版主

发表于 2017-8-31 15:12:20

有加载运行库吗
回复

使用道具 举报

0阿齐兹0  见习技师
 楼主|

发表于 2017-8-31 15:28:57

gada888 发表于 2017-8-31 15:12
有加载运行库吗

有。用的是MagneticSensorLsm303.h
回复

使用道具 举报

gada888  版主

发表于 2017-8-31 18:21:25

不是应该用Adafruit_LSM303-master库吗?那里面有样例
回复

使用道具 举报

0阿齐兹0  见习技师
 楼主|

发表于 2017-9-1 07:53:39

gada888 发表于 2017-8-31 18:21
不是应该用Adafruit_LSM303-master库吗?那里面有样例

这个库有校准的函数吗?
我试了一下,不知道为什么串口里面没有显示
回复

使用道具 举报

gada888  版主

发表于 2017-9-2 07:17:01

波特率9600,另外模块的IIC地址写对没有。你可以把贴图放帖子里。这样别人才知道你具体遇到的问题是什么。
回复

使用道具 举报

0阿齐兹0  见习技师
 楼主|

发表于 2017-9-2 07:38:34

gada888 发表于 2017-9-2 07:17
波特率9600,另外模块的IIC地址写对没有。你可以把贴图放帖子里。这样别人才知道你具体遇到的问题是什么。 ...

LSM303电子罗盘怎么调试?图1
捕获1.PNG
回复

使用道具 举报

0阿齐兹0  见习技师
 楼主|

发表于 2017-9-2 07:39:48

gada888 发表于 2017-9-2 07:17
波特率9600,另外模块的IIC地址写对没有。你可以把贴图放帖子里。这样别人才知道你具体遇到的问题是什么。 ...

波特率是9600,地址程序里面好像没有:L
回复

使用道具 举报

gada888  版主

发表于 2017-9-2 10:51:54

本帖最后由 gada888 于 2017-9-2 14:00 编辑

下载附件Adafruit_LSM303-master.zip试一下以下代码:LSM303DLHC_test.ino
[mw_shl_code=applescript,true]// I2C device class (I2Cdev) demonstration Arduino sketch for LSM303DLHC class
// 3/10/2015 by Nate Costello <natecostello at gmail dot com>
// Updates should (hopefully) always be available at https://github.com/jrowberg/i2cdevlib
//
// Changelog:
//     2015-03-10 - initial release

/* ============================================
I2Cdev device library code is placed under the MIT license
Copyright (c) 2011 Jonathan Arnett, Jeff Rowberg

Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
===============================================
*/

// Arduino Wire library is required if I2Cdev I2CDEV_ARDUINO_WIRE implementation
// is used in I2Cdev.h
#include <Wire.h>

// I2Cdev and LSM303DLHC must be installed as libraries, or else the .cpp/.h files
// for both classes must be in the include path of your project
#include <I2Cdev.h>
#include <LSM303DLHC.h>

// default address is 105
// specific I2C address may be passed here
LSM303DLHC accelMag;

int16_t ax, ay, az;
int16_t mx, my, mz;

#define LED_PIN 13 // (Arduino is 13, Teensy is 6)
bool blinkState = false;

void setup() {
    // join I2C bus (I2Cdev library doesn't do this automatically)
    Wire.begin();

    // initialize serial communication
    // (38400 chosen because it works as well at 8MHz as it does at 16MHz, but
    // it's really up to you depending on your project)
    Serial.begin(9600);

    // initialize device
    Serial.println("Initializing I2C devices...");
    accelMag.initialize();

    // verify connection
    Serial.println("Testing device connections...");
    Serial.println(accelMag.testConnection() ? "LSM303DLHC connection successful" : "LSM303DLHC connection failed");

    // configure LED for output
    pinMode(LED_PIN, OUTPUT);

    // set scale to 2Gs
    accelMag.setAccelFullScale(2);

    // set accel data rate to 200hz
    accelMag.setAccelOutputDataRate(200);

    // test scale
    Serial.print("Accel Scale: ");
    Serial.println(accelMag.getAccelFullScale());

    // test data rate
    Serial.print("Accel Output Data Rate: ");
    Serial.println(accelMag.getAccelOutputDataRate());

    // set mag data rate to 220hz
    accelMag.setMagOutputDataRate(220);

    // test mag data rate
    Serial.print("Mag Output Data Rate: ");
    Serial.println(accelMag.getMagOutputDataRate());

    //set mag gain
    accelMag.setMagGain(1100);

    // test mag gain
    Serial.print("Mag Gain: ");
    Serial.println(accelMag.getMagGain());

    //enable mag
    accelMag.setMagMode(LSM303DLHC_MD_CONTINUOUS);
    Serial.println(accelMag.getMagMode());


}

void loop() {
    // read raw angular velocity measurements from device
    accelMag.getAcceleration(&ax, &ay, &az);
    accelMag.getMag(&mx, &my, &mz);

    // Serial.print("Accelation:\t");
    // Serial.print(ax,HEX); Serial.print("\t");
    // Serial.print(ay,HEX); Serial.print("\t");
    // Serial.print(az,HEX);

    // Serial.print("  Magnetic Field:\t");
    // Serial.print(mx,HEX); Serial.print("\t");
    // Serial.print(my,HEX); Serial.print("\t");
    // Serial.println(mz,HEX);

    // Serial.print("Accelation:\t");
    // Serial.print(ax); Serial.print("\t");
    // Serial.print(ay); Serial.print("\t");
    // Serial.print(az);

    // Serial.print("  Magnetic Field:\t");
    // Serial.print(mx); Serial.print("\t");
    // Serial.print(my); Serial.print("\t");
    // Serial.println(mz);

    Serial.print("Accelation:\t");
    Serial.print(ax*0.0000625F,4); Serial.print("\t");
    Serial.print(ay*0.0000625F,4); Serial.print("\t");
    Serial.print(az*0.0000625F,4);

    Serial.print("  Magnetic Field:\t");
    Serial.print(mx); Serial.print("\t");
    Serial.print(my); Serial.print("\t");
    Serial.println(mz);

    // blink LED to indicate activity
    blinkState = !blinkState;
    digitalWrite(LED_PIN, blinkState);

    delay(1000);
}

[/mw_shl_code]
回复

使用道具 举报

0阿齐兹0  见习技师
 楼主|

发表于 2017-9-2 11:37:19

gada888 发表于 2017-9-2 10:51
试一下以下代码:LSM303DLHC_test.ino
[mw_shl_code=applescript,true]// I2C device class (I2Cdev) demon ...

库文件可以发我一份吗
回复

使用道具 举报

0阿齐兹0  见习技师
 楼主|

发表于 2017-9-2 16:50:41

gada888 发表于 2017-9-2 10:51
试一下以下代码:LSM303DLHC_test.ino
[mw_shl_code=applescript,true]// I2C device class (I2Cdev) demon ...

LSM303电子罗盘怎么调试?图1
回复

使用道具 举报

gada888  版主

发表于 2017-9-3 13:15:32


你下载并添加那个I2C.h
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

为本项目制作心愿单
购买心愿单
心愿单 编辑
[[wsData.name]]

硬件清单

  • [[d.name]]
btnicon
我也要做!
点击进入购买页面
上海智位机器人股份有限公司 沪ICP备09038501号-4

© 2013-2024 Comsenz Inc. Powered by Discuz! X3.4 Licensed

mail